- Petrol
T263XS
Loop handle professional brushcutter with easy starting and ergonomic design.
Shindaiwa brushcutters have been designed over decades to strike the perfect balance between power, comfort and precision so you can get jobs done fast with minimal fatigue. The T263XS has a 25.4cm³ engine with an output of 1.04kW, it's easy starting due to Shindaiwa's patented Soft Start technology, comes equipped with a heavy duty air filter and weighs just 5.6kg.
EAN code: #N/A
- Rated power (kW)
- 1
- Dry weight (kg)
- 5.5
- Handle type
- L
Product
Technologies
ES-Start
Spring-assisted system makes starting significantly easier.
Loop-handle
Heavy Duty Air Filter
Product
Specifications
- Engine type
- 2 stroke
- ES-Start
- true
- Heavy Duty air Filter
- true
- Rated power (kW)
- 1
- Rated power (ps)
- 1.4
- Power source type
- Petrol
- Dry weight (kg)
- 5.5
- Motor position
- Top
- Fuel consumption at maximum engine power (L/h)
- 0.61
- Fuel mix ratio
- 2
- Gear reduction ratio
- 1.36
- Recommended engine speed at idling (r/min)
- 3000
- No-load speed (r/min)
- 9400
- Primer pump
- true
- Starting mode
- ES Start
- Standardised nylon head (item number)
- SF400/S1
- Standardised nylon head (type)
- SF400
- Output (kW)
- 1
- Output (ps)
- 1.4
- Air filter type
- Pleated paper + foam
- Carburetor type
- Diaphragm
- Choke
- true
- Clutch type
- Centrifugal
- Displacement (cm³)
- 25.4
- Drive shaft diameter (mm)
- 7
- Drive shaft type
- Solid
- Fuel tank capacity (mL)
- 600
- Ignition type
- CDI
- Main pipe diameter (mm)
- 25
- Main pipe type
- Rotational control
- Spark plug model
- NGK CMR7H
- CO² (g/kW・h)
- 998
- Emmission certification
- true
- Power unit manufacturer
- YAMABIKO
- Sound power level (dB(A)) Blade / nylon head
- - / 105.0
- Sound pressure level (dB(A)) Blade / nylon head
- - / 92.9
- Vibration Left handle / Right handle (m/s²) Nylon head
- 4.0 / 2.9
- Handle type
- L
- Loop handle
- true
- Toolless adjustable air filter cover
- true
- Shoulder strap
- true
Any questions?
FAQ
Store nylon line in a cool area away from direct sun light. Before use it's a good idea to keep the line in a bucket of water for at least 24 hours. This keeps the line flexible and reduces the need for refilling as the line wont break as easily - saving you time and increasing your efficiency.
Trimmers and brushcutters are used to clear areas that your mower can't get to or lacks the power for. If you use the correct technique when trimming you will increase your productivity and reduce fatigue. The trimmer head should be just above the ground at a slight angle. Since it's the end of the line that does most of the work, ensure your line is always close to its full length. The cutter on the shield will automatically ensure any excess length is removed. When cutting, using a sweeping motion from right to left, will keep consistency and also push the clippings into an orderly pile. Between cuts, when sweeping the tool, it's good practice to release the throttle to idling.
