- Petrol
C263S
U handle brushcutter built for professionals with anti vibration technology and easy starting.
Designed for comfort, power and precision, the Shindaiwa C263S is crammed full of features to increase your productivity and power through tough jobs. Soft Start for effortless starting, a heavy duty air filter to protect the engine from dust and debris and light weight ergonomic design make this U-handle brushcutter an ideal choice for daily commercial use.
EAN code: #N/A
- Rated power (kW)
- 1
- Dry weight (kg)
- 5.6
- Handle type
- U
Product
Technologies
ES-Start
Spring-assisted system makes starting significantly easier.
U-handle
Heavy Duty Air Filter
Product
Specifications
- Engine type
- 2 stroke
- ES-Start
- true
- Heavy Duty air Filter
- true
- Rated power (kW)
- 1
- Rated power (ps)
- 1.4
- Power source type
- Petrol
- Dry weight (kg)
- 5.6
- Motor position
- Top
- Fuel consumption at maximum engine power (L/h)
- 0.61
- Fuel mix ratio
- 2
- Gear reduction ratio
- 1.36
- Recommended engine speed at idling (r/min)
- 3000
- No-load speed (r/min)
- 9400
- Primer pump
- true
- Starting mode
- ES Start
- Standardised metal blade (item number)
- X405-000320
- Standardised metal blade (type)
- 3-cutter metal blade
- Standardised nylon head (item number)
- SF400/S1
- Standardised nylon head (type)
- SF400
- Output (kW)
- 1
- Output (ps)
- 1.4
- Air filter type
- Pleated paper + foam
- Carburetor type
- Diaphragm
- Choke
- true
- Clutch type
- Centrifugal
- Displacement (cm³)
- 25.4
- Drive shaft diameter (mm)
- 7
- Drive shaft type
- Solid
- Fuel tank capacity (mL)
- 600
- Ignition type
- CDI
- Main pipe diameter (mm)
- 25
- Main pipe type
- Rotational control
- Spark plug model
- NGK CMR7H
- CO² (g/kW・h)
- 998
- Emmission certification
- true
- Power unit manufacturer
- YAMABIKO
- Sound power level (dB(A)) Blade / nylon head
- 106,3/108,0
- Sound pressure level (dB(A)) Blade / nylon head
- 39,0/93,1
- Vibration Left handle / Right handle (m/s²) Nylon head
- 4.1 / 3.6
- Handle type
- U
- U handle
- true
- Toolless adjustable air filter cover
- true
- Harness
- Ergonomic harness
Any questions?
FAQ
Store nylon line in a cool area away from direct sun light. Before use it's a good idea to keep the line in a bucket of water for at least 24 hours. This keeps the line flexible and reduces the need for refilling as the line wont break as easily - saving you time and increasing your efficiency.
Trimmers and brushcutters are used to clear areas that your mower can't get to or lacks the power for. If you use the correct technique when trimming you will increase your productivity and reduce fatigue. The trimmer head should be just above the ground at a slight angle. Since it's the end of the line that does most of the work, ensure your line is always close to its full length. The cutter on the shield will automatically ensure any excess length is removed. When cutting, using a sweeping motion from right to left, will keep consistency and also push the clippings into an orderly pile. Between cuts, when sweeping the tool, it's good practice to release the throttle to idling.
