- Petrol
B410S-LW
Professional ultra light weight U handle petrol brushcutter with anti vibration and easy starting.
Lightweight and powerful. The LW in the name stands for light weight and this version of the B410S weighs only 8.2kg, yet retains the same 41.5cm³ professional grade engine and 1.78kW output. Perfectly balanced to provide the power and comfort to tackle those long arduous jobs. Increase your productivity and get through jobs in comfort.
EAN code: 4934110715393
- Rated power (kW)
- 1.8
- Dry weight (kg)
- 8
- Handle type
- U
Product
Technologies
ES-Start
Spring-assisted system makes starting significantly easier.
U-handle
Heavy Duty Air Filter
Product
Specifications
- Engine type
- 2 stroke
- ES-Start
- true
- Heavy Duty air Filter
- true
- Rated power (kW)
- 1.8
- Rated power (ps)
- 2.4
- Power source type
- Petrol
- Dry weight (kg)
- 8
- Motor position
- Top
- Fuel consumption at maximum engine power (L/h)
- 1.05
- Fuel mix ratio
- 2
- Gear reduction ratio
- 1.33
- Recommended engine speed at idling (r/min)
- 2800
- No-load speed (r/min)
- 10300
- Primer pump
- true
- Starting mode
- ES Start
- Delivered with a nylon head
- Yes
- Standardised nylon head (item number)
- C6000256
- Standardised nylon head (type)
- RAPID-LOADER 35
- Output (kW)
- 1.8
- Output (ps)
- 2.4
- Air filter type
- Pleated paper + foam
- Carburetor type
- Diaphragm
- Choke
- true
- Clutch type
- Centrifugal
- Displacement (cm³)
- 41.5
- Drive shaft diameter (mm)
- 8
- Drive shaft type
- Solid
- Fuel tank capacity (mL)
- 690
- Ignition type
- CDI
- Main pipe diameter (mm)
- 28
- Main pipe type
- Rotational control
- Spark plug model
- NGK BPMR8Y
- CO² (g/kW・h)
- 952
- Emmission certification
- true
- Power unit manufacturer
- YAMABIKO
- Sound power level (dB(A)) Blade / nylon head
- - / 109.1
- Sound pressure level (dB(A)) Blade / nylon head
- - / 96.8
- Vibration Left handle / Right handle (m/s²) Nylon head
- 5.3 / 4.7
- Handle type
- U
- U handle
- true
- Toolless adjustable air filter cover
- true
- Harness
- Ergonomic harness
Any questions?
FAQ
Store nylon line in a cool area away from direct sun light. Before use it's a good idea to keep the line in a bucket of water for at least 24 hours. This keeps the line flexible and reduces the need for refilling as the line wont break as easily - saving you time and increasing your efficiency.
Trimmers and brushcutters are used to clear areas that your mower can't get to or lacks the power for. If you use the correct technique when trimming you will increase your productivity and reduce fatigue. The trimmer head should be just above the ground at a slight angle. Since it's the end of the line that does most of the work, ensure your line is always close to its full length. The cutter on the shield will automatically ensure any excess length is removed. When cutting, using a sweeping motion from right to left, will keep consistency and also push the clippings into an orderly pile. Between cuts, when sweeping the tool, it's good practice to release the throttle to idling.
